0086-571-87978016
info@youngsunpack.com
MH-ZB-6I Shrink Wrapper
Using interpretation:
Before operating the machine, please read the cautions that are as follows to ensure safety operation and keep the machine in the best state.
*Please confirm used power of the machine. Don’t plug in the wrong power. !
*Don’t put your hands under the knife when operating.
*In urgency circumstance, you can press the emergency stop switch to cut off the motor power and let the machine stop running.
*Don’t touch the heater avoiding scald.
*Turn off the power and air pressure supply after working and then clean the machine.
*Turn off the power and air pressure supply when examining and repairing then clean the machine
*Don’t put the tools or others on the machine or inside the machine.
*Don’t take the wiring apart provided safety.
*Nobody else except the electrical technician can examine and repair the wiring.
*Don’t wash the machine with water. If the work yard is humid, the operators must not be barefoot working.
*Make sure connect the earth wire avoiding the accident.
*Lay this catalogue beside the machine.
- MH-ZB-6I Shrink Wrapper
- Power supply
- 380V 50Hz 13KW
- Air pressure
- 6kg/cm2
- Conveyor speed
- 18m/min
- Working speed
- 45-90pcs/min
- Package Size
- Ø100mm(max)
- Table height
- 850mm
*Notes: Technical data subject to variations without prior notice Output depends on the operator and the type of the package

